Warranty / Returns

CUSTOMERS RESPONSIBILITIES


The customer must return the used part / products to Mayor’s Head & Block Inc. free and clear of any liens during the warranty period.  Mayor’s Head & Block Inc. will then replace defective parts / product or authorize repair if it has been determined that the defect is covered by the provisions of this warranty.  It is the customer responsibility to pay any and all transportation costs to return the part / product to Mayor’s Head & Block Inc. under the provision of the warranty.  The customer will be responsible for the payment of the labor costs in connection with the removal and replacement of the part / product, including, but not limited to, the removal of the engine from or to the vehicle or from any devise where the engine may be placed in.

The parties agree that the customer sole and exclusive remedy against Mayor’s Head & Block Inc. shall be for the repair or replacement of the defective parts / product as provided herein.  The customer agrees that no other remedy, including but not limited to incidental or consequential  damages for lost profit, lost sales, injury to person or property or any other incidental or consequential loss including but not limited to any wrecker/towing charges, oil and filters, hoses and belts shall be available to him/her.  The customer or his /her agent by signing this agreement acknowledges that he has read this agreement and the warranty disclaimers herein and further acknowledges that this agreement contains the entire agreement of the parties and that there are no antecedent of extrinsic representation, warranties or collateral provisions that are no intended to be discharged and nullified

 INSPECTION, REUSE OR RECONDITIONING OF CUSTOMERS PARTS

It is impossible to determine when a part or component is at or near the end of its useful life due to the fatigue or other cause.  As to any customer supplied or Mayor’s Head & Block Inc. supplied part(s), inspected, serviced or reconditioned by us, WE DISCLAIM ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE FITNESS OF ANY SUCH PART(S) FOR A PARTICULAR PURPOSE OR TO IT MERCHANTABILITY; even though our inspection indicates that such part(s) appear to meet manufacturers specifications, or when our reconditioning has returned such part(s) to a condition that is normally acceptable in accordance with industry practice for reuse.

LIMITED WARRANTY ON MACHINE WORK

CYLINDER HEADS are warranted against defective materials and workmanship for a period of ninety days.  No labor allowance. Repair or replacement ONLY!  It is impossible to determine when a valve,valve seat or valve spring is at or near the end of its useful life due to the fatigue or other cause.  As to any customer supplied or Mayor’s Head & Block Inc. supplied part(s), inspected, serviced or reconditioned by us, WE DISCLAIM ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE FITNESS OF ANY SUCH PART(S) FOR A PARTICULAR PURPOSE OR TO IT MERCHANTABILITY; even though our inspection indicates that such part(s) appear to meet manufacturers specifications, or when our reconditioning has returned such part(s) to a condition that is normally acceptable in accordance with industry practice for reuse.
( Valves,Valve Spring for Heavy Duty and Marine engines, Mayor`s strongly recommends these parts be installed new we are not responsible if these part fail also we will disclaim any kind of warranty !! )

CRANKSHAFTS AND CONNECTING RODS, warranty is limited to the replacement of part BEFORE INSTALLATION.

CYLINDER BLOCKS are warranted against defective materials and workmanship BEFORE ASSEMBLY.

 Performance of these four components depends on correct assembly, servicing and operation of the complete unit.  Only a qualified person should assemble these components and draw to our attention at time of assembly, any possible defects in our workmanship and or materials.  We cannot be responsible or liable for the assembled unit/engine thereafter.

 LIMITED WARRANTY ON ENGINE ASSEMBLIES

Mayor’s Head & Block Inc. warrants their Re-manufactured COMPLETE ASSEMBLY, LONG BLOCK ASSEMBLY, SHORT BLOCK ASSEMBLY, to be free from defects in material and/or workmanship, when property installed by a competent technician, and under normal use and service for the period of (Automotive, Light Truck Non-Commercial, one hundred eighty days or six thousand miles. Marine Non-Commercial, one hundred eighty days or two hundred fifty hours. Industrial, Truck, Marine, Construction Heavy Duty-Commercial ninety days or one hundred fifty hours. ) from the date or time of this invoice which ever accuser first. Customer must supply first page of invoice with odometer reading or hour reading at time of installation or warranty period will be ninety days or fifty hours only! This limited warranty shall not apply to engines used or intended for (HIGH-PERFORMANCES) or subjected to misuse, neglect /subjected to operations causing greater than normal wear / used for any purpose for which it is not originally designed / water contamination in the fuel system / failures due to improper specifications and/or installation !!)  Any work done by others without Mayor’s Head & Block Inc. written authorization shall automatically terminate customer’s rights or remedy against Mayor’s Head & Block Inc. DETONATION, PRE-IGNITION OR BURNT PISTONS IS NOT COVERED BY THIS WARRANTY.

Failure of any of the following conditions will also avoid warranty, Carburetor or fuel injection system must be rebuilt or replaced.  All ignition or fuel systems components (plugs, wires, points, cap/fuel injector pump, turbo, etc) must be replaced or reconditioned.  All cooling system components (water pump, hoses, radiator, fan clutch, thermostat, etc.) reconditioned or replaced.  On marine applications all of the above plus the exhaust manifolds, risers, raw water pump, and ignition timing must be set to manufactures specification.  Mayor’s Head & Block Inc. warranty is to the original purchaser; Warranty is not transferable.

ALL RETURNS MUST BE MADE WITHIN 10 DAYS WITH ORIGINAL INVOICE AND ARE SUBJECT TO A 15% RESTOCKING CHARGE!  PACKAGE MUST BE IN ORIGINAL CONDITION.    NO RETURNS ON NON-STOCKING OR SPECIAL ORDERS!