Cylinder Head Replacement Tips

Before installing the cylinder head, use an aerosol gasket ­remover to soften traces of baked-on cylinder head gasket. A scraper using a straight razor blade can be especially effective at cutting away gasket residue without damaging the engine block or head. Next, make sure that the blind bolt holes in the cylinder block are clean and free of solid or liquid debris. In some cases, a thread chaser might be needed to clean corroded threads.

After cleaning, a machinist’s straight edge should be used to measure warping in the cylinder head and engine block. If warping exceeds the manufacturer’s specifications, the head needs to be ­repaired or replaced.

Before final assembly, an aerosol parts cleaner should also be used to remove any traces of dirt or liquid contamination from the block and head surfaces. Keep in mind that most modern cylinder head gaskets should be installed dry, without additional sealants. A pair of guide pins can be fabricated to guide the cylinder head into place to prevent damaging the cylinder head gasket. These pins should be slotted at the top for easy removal with a screwdriver. Because over-torquing can ruin modern intake manifolds, follow correct bolt torque sequencing and values when assembling the manifold, plenum and related parts.

5,424 replies on “Cylinder Head Replacement Tips”

Wonderful blog! I found it while browsing on Yahoo News.

Do you have any suggestions on how to get listed
in Yahoo News? I’ve been trying for a while but I never seem to get there!

Its such as you read my thoughts! You appear to
understand a lot approximately this, like you wrote the guide in it or something.

I feel that you could do with a few percent to drive the message home
a little bit, however other than that, that is great blog.
A great read. I will definitely be back.

Thank you, I’ve just been searching for information about this topic for
ages and yours is the greatest I’ve found out till now.
But, what concerning the conclusion? Are you certain concerning the supply?

Can I simply just say what a relief to discover a
person that actually understands what they’re talking about on the net.
You certainly know how to bring an issue to
light and make it important. More and more people must look at this and
understand this side of the story. I was surprised that you aren’t more
popular since you certainly have the gift.

You can certainly see your expertise in the
article you write. The arena hopes for more passionate writers such
as you who are not afraid to mention how they believe.
All the time follow your heart.

Attractive element of content. I simply stumbled
upon your web site and in accession capital to claim that I acquire actually enjoyed account your blog posts.
Anyway I’ll be subscribing for your feeds or even I achievement you get admission to constantly fast.

Hey there would you mind stating which blog
platform you’re working with? I’m going to start my own blog in the near future but
I’m having a tough time selecting between BlogEngine/Wordpress/B2evolution and Drupal.
The reason I ask is because your design and style seems different then most blogs and I’m
looking for something completely unique.
P.S My apologies for being off-topic but I had to

Comments are closed.